bigladvr6 0 Posted June 1, 2005 Report Share Posted June 1, 2005 info needed my vr is getting too warm for my liking it goes all the way to 110 and stays there, no head gasket issues both fans are working correctly not lossing any coolant new 160 thermo to go in any other ideas welcome???? !shy !shy Link to post Share on other sites
VR6Rob 0 Posted June 1, 2005 Report Share Posted June 1, 2005 is this water or oil temp? Link to post Share on other sites
bigladvr6 0 Posted June 1, 2005 Author Report Share Posted June 1, 2005 it is the water temp Link to post Share on other sites
VR6Pete 1,455 Posted June 1, 2005 Report Share Posted June 1, 2005 air lock? try flushing through the coolant.... Link to post Share on other sites
VR6Rob 0 Posted June 1, 2005 Report Share Posted June 1, 2005 Most problems with cooling are down to the themostat or aux water pump. if you have the new themostat change that and see where the temp is after. Link to post Share on other sites
bigladvr6 0 Posted June 1, 2005 Author Report Share Posted June 1, 2005 ok ill do it this weekend many thanx for the quick replies as usual Link to post Share on other sites
Eat this 2 Posted June 1, 2005 Report Share Posted June 1, 2005 aux watar pump doesnt cause overheating Link to post Share on other sites
stockers 1 Posted June 3, 2005 Report Share Posted June 3, 2005 engine overheating:1.low coolant level2.radiator hose restricted3.drive belt worn4.faulty thermostat5.clogged radiator6.incorrect ignition timing or valve timing6.coolant pump faulty7.poor air flow through radiator8.incorrect doolantconcentration (should be 50/50 coolant and distilled water)according to the bentleys bible, good luck Link to post Share on other sites
Recommended Posts