Gregsyb 4 Posted January 3, 2013 Report Share Posted January 3, 2013 Whilst stripping and refurbing i have found a fooked seal in the oil cooler, I know the cooler isn't standard but i dont know what it is:Part no. 021 117 063Anyone have any information / shed any light as to where i can get this?Cheers all, G Link to post Share on other sites
Daverse 175 Posted January 3, 2013 Report Share Posted January 3, 2013 vw i think sell them, cant be much, or tps or gsf. Id start at either tps ow vw first. Link to post Share on other sites
russj249 2 Posted January 3, 2013 Report Share Posted January 3, 2013 I can't tell very well on my phone, but the cooler looks like a mocal sandwich plate as it looks like there's 2 oil lines going to it? The standard cooler has 2 water pipes on it.Am I right in thinking its got an external oil cooler on it such as a Mocal 13 row cooler? as with these, you use the existing cap (in first picture) with the sandwich plate. Link to post Share on other sites
russj249 2 Posted January 3, 2013 Report Share Posted January 3, 2013 Oops.. didn't read the description very well lol.. it looks like a Mocal sandwich plate, which use the metal OBD1 end cap (as in first pic) Link to post Share on other sites
Lukey. 381 Posted January 4, 2013 Report Share Posted January 4, 2013 If its the seal with flat sides that sits in the groove in the cap it's a standard oil cooler seal available from VW PN 038 117 070. If the other side of the cooler (engine side) uses a rounded seal with 2 tabs with holes in opposite each other this is also a standard seal PN 038 117 070 A. Link to post Share on other sites
Gregsyb 4 Posted January 4, 2013 Author Report Share Posted January 4, 2013 Thanks all, Much appreciated!And yup, running an external oil cooler Link to post Share on other sites
Caddyslammed 16 Posted March 2, 2013 Report Share Posted March 2, 2013 Handy Link to post Share on other sites
Recommended Posts