kazama76 1 Posted July 31, 2011 Report Share Posted July 31, 2011 My water overflow tank/expansion tank/water resovoir tank cap failed and blew a load of brown cruddy water all over my engine bay. My solution was to jet wash it (i know myself this is a big no no) Anybody got a better less risky solution? Link to post Share on other sites
Antihero1981 8 Posted August 1, 2011 Report Share Posted August 1, 2011 na should be ok , i would just keep engine running while you do it...bag up coil pack ect Link to post Share on other sites
kazama76 1 Posted August 1, 2011 Author Report Share Posted August 1, 2011 Ah wicked, to the jet wash :-D Link to post Share on other sites
851corsa 0 Posted August 1, 2011 Report Share Posted August 1, 2011 Autoglym 'engine and machine' cleaner may be worth a try. It is less intrusive than a jet wash and cleans very well. Link to post Share on other sites
J5KE F 0 Posted August 1, 2011 Report Share Posted August 1, 2011 I use a big tub of wipes available at b&q.. I believe theyre called scrubbs.. Easy and cheap! Link to post Share on other sites
b19drg 0 Posted August 1, 2011 Report Share Posted August 1, 2011 I bag all my coilpack etc , a good spray of de greaser everywhere start engine and jet wash , but don't aim to hard in any particular area and you should be fine I have done mine a few times now Link to post Share on other sites
Recommended Posts