kazama76 1 Posted July 25, 2011 Report Share Posted July 25, 2011 Hey guys I know the pcd fitment on a standard vr is 5 x 100 et 45.Will only et45 fit? or what other sizes can i play with? I have standard brake set up and only lowered 30mmAny help would be appreciatedKev Link to post Share on other sites
MJ Vr6 79 Posted July 26, 2011 Report Share Posted July 26, 2011 How far do you wanna go...lolWhat width wheel etc... Link to post Share on other sites
VR6Nat 9 Posted July 26, 2011 Report Share Posted July 26, 2011 well i am running 16s (7.5" wide) that are ET15. My car is lowered a lot and the arches had to be rolled... but previous to that i ran 17s (7.5" wide) that were ET30 and not quite as low as i am now and had no worries. Link to post Share on other sites
MJ Vr6 79 Posted July 26, 2011 Report Share Posted July 26, 2011 well i am running 16s (7.5" wide) that are ET15. My car is lowered a lot and the arches had to be rolled... but previous to that i ran 17s (7.5" wide) that were ET30 and not quite as low as i am now and had no worries. ET 15!!! :-# You go girl!!!! LoL! Link to post Share on other sites
Ian_rogers 0 Posted July 26, 2011 Report Share Posted July 26, 2011 I'm runnin ET 7 n on 16s, fairly low (not enough) need arches cutting tho to go lower Link to post Share on other sites
kazama76 1 Posted July 26, 2011 Author Report Share Posted July 26, 2011 Right so i can get anything between et45 and et15(ish) no problem :-) Dont want to start rolling the arch Link to post Share on other sites
VR6Nat 9 Posted July 26, 2011 Report Share Posted July 26, 2011 I would only go to ET30 if you don't want to roll arches. I have slightly stretched tyres on my ET15s and arch work to get them to fit. My ET30s were ok though without stretch or arch work. Link to post Share on other sites
kazama76 1 Posted July 27, 2011 Author Report Share Posted July 27, 2011 Cheers buddy Link to post Share on other sites
Recommended Posts