Jump to content

gearbox slipping in reverse :(


Recommended Posts

after everything being sorted out i drove the vr with its new automatic gearbox. drives fine in everything but reverse where it just slips . When the new gearbox came ( that i spent £400 on ) it had some clutch plate bits in the sump.

At this time i contacted the seller who reassured me its fine and its been tested thoroughly . what do i do guys? this is so demoralising after the amount of my time and money that has gone towards it for new gearbox, chains guides tensioners, water pump, rad, thermo housing, crack pipe, driveshaft boots etc etc ...

Link to post
Share on other sites

Ohhh nooo mine started slipping in forward gears. then stoped and started slipping in reverse then when i put the gearstick to N it still drives forward. got 2nd hand gearbox off ebay and in the middle of fitting it. hope that dont happend to me. i only spent £115 on a gearbox with 7days warrenty. did you pay via paypal if so make a claim. other wise fight and sat you want your money back.

you got any tips for me when removeing / re fitting the autobox? .

also have you filled the autobox up with the right fluid and right amount of fluid. has yours got the dip stick or not

Link to post
Share on other sites

it was in january thaat i bought it so too late ...

he blamed it on the transport that i payed for.

i have the old box so im considering after speaking to a auto gbox mechanic to start taking pics and drawing diagrams for taking it apart. then when i get to the reverse bits ill see how hard it would be to replace. any views are welcome - this is on old vr6 auto box that has cracked down the side btw

Link to post
Share on other sites
×
×
  • Create New...