Antihero1981 8 Posted February 16, 2011 Report Share Posted February 16, 2011 how easy is it to loosen slam panel? might have to take mine off to take alternator off , seems a bit easier than taking charger off and jacking up engine ect Link to post Share on other sites
bungy 2 Posted February 16, 2011 Report Share Posted February 16, 2011 I'm sure someone will post a photo soon while i look for one.. Link to post Share on other sites
craggsy 91 Posted February 16, 2011 Report Share Posted February 16, 2011 Easy if you dont have aircon/climate control.Bumper off, bumper iron off, couple of bolts near where it meets wing, unclip wiring and thats basicly it.Oh and undo coolant hoses as well.If aircon you will have to degass it legally first Link to post Share on other sites
Daverse 175 Posted February 16, 2011 Report Share Posted February 16, 2011 Iv literally just taken the slam panel off my vento mate, of you need any more help let me know Link to post Share on other sites
richievr 1 Posted February 16, 2011 Report Share Posted February 16, 2011 Bumper off' date=' bumper iron off, couple of bolts near where it meets wing, unclip wiring and thats basicly it.Oh and undo coolant hoses as well.[/quote']you can leave the bumper and iron on i believe.... pop out the clips in the wheel arch that secure the edges of the bumper to the arch trim. undo coolant hoses to rad.un plug big loom round thing on slam panel by o/s headlight. pop out indicators/fogs.undo the 4 bolts behind them holding front panel to chassis leg ends.undo 2 small bolts on outer edges of top of slam panel to the wings. pretty sure it all comes off in one go then, as long as you don't have air con.... Link to post Share on other sites
richievr 1 Posted February 16, 2011 Report Share Posted February 16, 2011 like this... Link to post Share on other sites
Antihero1981 8 Posted February 17, 2011 Author Report Share Posted February 17, 2011 mmm i have aircon........so more of a mission then?and i presume i would have to replace all coolant in the rads Link to post Share on other sites
Recommended Posts