dub_weiser 0 Posted January 31, 2005 Report Share Posted January 31, 2005 Got a set of FK Konigsports, and want to adjust the damping as its a bit soft. Comes with two diff types of adjusters and I'm not sure which one's to use on the front and rear. Also I'm assuming they all need to be adjusted the same front and rear?Thanks guys Link to post Share on other sites
six appeal 53 Posted January 31, 2005 Report Share Posted January 31, 2005 Nope you can adjust the fronT and rear as you please, although I wound advise you do each axle ones the same!As for the 2 different adjusters, one is just shallower than the other to allow you to get underneath the rear parcel shelf holder to adjust them! Link to post Share on other sites
dub_weiser 0 Posted January 31, 2005 Author Report Share Posted January 31, 2005 Nice one Si, much appreciated. Link to post Share on other sites
VR6Rich 3 Posted January 31, 2005 Report Share Posted January 31, 2005 You need the extended adjuster to do the fronts as they are inset in the strut top caps. As Si said the flat one is used for the back ones. Link to post Share on other sites
dub_weiser 0 Posted February 1, 2005 Author Report Share Posted February 1, 2005 Sorry guys do you turn clockwise or anti-clockwise to harden the damping? Link to post Share on other sites
six appeal 53 Posted February 1, 2005 Report Share Posted February 1, 2005 Clockwise I think, it should say on the little adaptor handle. Link to post Share on other sites
dub_weiser 0 Posted February 1, 2005 Author Report Share Posted February 1, 2005 Can't get that rear side bits off that hold the parcel shelf. Got the screws off but can't see how there clipped in and know I'll break something as I'm appling too much force. Link to post Share on other sites
binliner 0 Posted February 1, 2005 Report Share Posted February 1, 2005 just pull them up and they should come off Link to post Share on other sites
Recommended Posts