dman78 1 Posted March 12, 2010 Report Share Posted March 12, 2010 i want to get some polybushes but they have two sizes 18mm and 20mm,what size sholud i get and how would i know what size im currently running Link to post Share on other sites
Dragon Dave 1 Posted March 12, 2010 Report Share Posted March 12, 2010 I would like to get some polybushes too. I haven't even got round to this question. I'll tag a long with this thread. Link to post Share on other sites
CALICO 130 Posted March 12, 2010 Report Share Posted March 12, 2010 for what the anti roll bar you will need a dial measure to be accurate but a ruler should be reasonably accurate Link to post Share on other sites
Knightrider 1 Posted March 18, 2010 Report Share Posted March 18, 2010 The standard front anti roll bar on a (1997) VR is 20mm. I've just fitted an Eibach ARB kit and measured the standard one off the car to see. Used a ruler, not dial measure or verniers, but it is defo not 18mm. Of complete irrelevance to this thread, going up just 2mm in thickness to 22mm increases anti roll stiffness by 46%!! Link to post Share on other sites
RAPgolfvr6182 2 Posted March 18, 2010 Report Share Posted March 18, 2010 http://cgi.ebay.co.uk/Powerflex-PFF85-205-20-Frnt-ARB-Bush-Seat-Ibiza-VW-Golf_W0QQitemZ130370183230QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item1e5aab203ethere for the vr6 1995 n above Link to post Share on other sites
Recommended Posts