Danny Salling 0 Posted September 16, 2009 Report Share Posted September 16, 2009 Im the proud owner of a 92´vr6 and im from Denmark.My engine have allways had a slight tapping noise but nothing major, but now after my girlfriend (now former girlfriend) has been driving it for aprox. 400 km the engine has a much louder tapping noise. Has she drivin it hard when it was cold and what seems to be the reason for the tapping noise being louder now and when cold? By the way the tapping is only between 700 rpm and 2200 rpm, after that you cant hear any tapping. Thanks in advance for your help :-)PSThe engine has done aprox. 160.000 km Link to post Share on other sites
The Monk 50 Posted September 16, 2009 Report Share Posted September 16, 2009 Have you checked your oil level mate? Link to post Share on other sites
Danny Salling 0 Posted September 17, 2009 Author Report Share Posted September 17, 2009 Yes i did and it was fine. Could it be the valve lifters, and if yes, wouldnt they do it all the way up through the rev count and not just when in low revs? Link to post Share on other sites
legvw 0 Posted September 17, 2009 Report Share Posted September 17, 2009 When was the last time it was serviced? A bit of fresh oil can shut the lifters up Link to post Share on other sites
Danny Salling 0 Posted September 17, 2009 Author Report Share Posted September 17, 2009 Its been about 5000 km since last oil change, so i dont think its the oil. Link to post Share on other sites
Miss-Vw 2 Posted September 18, 2009 Report Share Posted September 18, 2009 Vr's drink oil so might be worth giving it some fresh stuff. Link to post Share on other sites
Danny Salling 0 Posted September 18, 2009 Author Report Share Posted September 18, 2009 Yes it drinks some oil and vw says its normal, i just think its weird to make an engine that drinks oil. Mine drinks about 1 liter for every 1000 km. Couls the tapping noise come from low oil presure due to worn rod bearings? I now on the Escort RS turbo the tappets can be noise if the rod bearings is worn. I have new bearings and tappets and will when i change them give the engine som new piston rings, then the noise and oil drinking should be over right? Link to post Share on other sites
Recommended Posts