Timah89 1 Posted July 28, 2009 Report Share Posted July 28, 2009 hi got my MOT tomorrow, just done VAGCOM and i know about the abs sensor and i am having both front sensors changed at the MOT, would do it myself but this is easier and quicker! is the other fault code something related to the ABS or something else?VAG-COM Version: Release 409.1-SChassis Type: 1H - VW G/J/V Mk3Scan: 01,02,03,08,15,25,56-------------------------------------------------------------------------------Address 01: Engine Controller: 021 906 256 Component: MOTRONIC M3.8.1 HS V02 Coding: 00000 Shop #: WSC 013174 Faults Found:00668 - Supply Voltage Terminal 30 07-10 - Signal too Low - Intermittent00522 - Shareware Version. To Decode all DTCs 27-10 - Please Register/Activate - Intermittent00553 - Shareware Version. To Decode all DTCs 31-10 - Please Register/Activate - Intermittent17978 - Engine Start Blocked by Immobilizer P1570 - 35-10 - - - IntermittentReadiness: N/A-------------------------------------------------------------------------------Address 03: ABS Brakes Controller: 3A0 907 379 A Component: ABS/EDS ITTAE 20 GI V00 Coding: 03604 Shop #: WSC 000002 Faults Found:00283 - Front Left ABS Wheel Speed Sensor (G47) 35-00 - -00283 - Shareware Version. To Decode all DTCs 16-10 - Please Register/Activate - Intermittent Link to post Share on other sites
SankysVR6 1 Posted July 29, 2009 Report Share Posted July 29, 2009 The first one is, more likely that the battery has been disconnected at some time.Just make a note of it, clear the faults and check again in a few days. Link to post Share on other sites
Timah89 1 Posted July 29, 2009 Author Report Share Posted July 29, 2009 cool, shouldnt they self clear though when the fault goes and then re-scanned? Link to post Share on other sites
Rikki 2 Posted July 29, 2009 Report Share Posted July 29, 2009 the 283 is probably the abs sensor intermittent fault and now a permanent fault. It wont self clear but the light should go off after a drive! Link to post Share on other sites
Recommended Posts