goldievrvan 0 Posted April 24, 2009 Report Share Posted April 24, 2009 im lookin at getting a lightened flywheel anyone advise where to get one?? Link to post Share on other sites
FishWick 21 Posted April 24, 2009 Report Share Posted April 24, 2009 Fidanza - http://www.fidanza.com/Aluminum-Flywheels.aspxSchimmel - http://www.spturboparts.com/aftermarket/ViewDetails.aspx?prod=16024Or buy a new standard one from VW (£70 + VAT exchange) and get it drilled. Link to post Share on other sites
rodney 17 Posted April 24, 2009 Report Share Posted April 24, 2009 someone can advise me on this... Is the mount/fitment the same as say the 2l? you can always use smaller engine parts as long as the ratios and fitments are the same... Just makes idle a pain as there is no mass in it...if getting it drilled get it done by some one who knows how to otherwise it will give you issues Link to post Share on other sites
FishWick 21 Posted April 24, 2009 Report Share Posted April 24, 2009 I would only use the VR6 specific flywheel. The bolts are a very exact fit in the holes. Any slight clearance issues with the bolts can cause the flywheel to wobble around! Link to post Share on other sites
cabrioman 6 Posted April 24, 2009 Report Share Posted April 24, 2009 im using a lightened one off ebay now worries so far and man was it light .... thought it was my clutch id ordered at the same time but once the box was open i was suprised ..... Link to post Share on other sites
gavinvr6 0 Posted April 25, 2009 Report Share Posted April 25, 2009 i've been looking at those lightened ones on ebay. they seem to be reasonably well priced and if its the same one im thinking of at 7lb thats pretty damn light. but does anyone know where i can get a standard one lightened and balanced on thesouth cost? Link to post Share on other sites
Recommended Posts