Cuske 0 Posted March 3, 2009 Report Share Posted March 3, 2009 I've got a mk2 with a vr conversion which I haven't done myself. I've noticed today that there's a sensor wire and plug missing. Just under the inlet manifold on the right hand side there's room for 3, I've got a blue and yellow and can't see another one hanging around so presume it's been disregarded. Does anyone know what I'm on about, what the missing one is, and what colour it is, cheers Chris. Link to post Share on other sites
thegoth 5 Posted March 3, 2009 Report Share Posted March 3, 2009 the third sensor is for A/C control. blue and yellow are what you need. So nothing to worry about. Link to post Share on other sites
Cuske 0 Posted March 3, 2009 Author Report Share Posted March 3, 2009 Thanks very much. Link to post Share on other sites
russvr6 0 Posted March 3, 2009 Report Share Posted March 3, 2009 i have 3 and haven't got a/c its either black or brown depending on if its 4 or 2 pin its something to do with the radiator fan Link to post Share on other sites
Cuske 0 Posted March 3, 2009 Author Report Share Posted March 3, 2009 I'll take a look at how many pins it's got, think it's 2. Link to post Share on other sites
russvr6 0 Posted March 3, 2009 Report Share Posted March 3, 2009 if its 2 pin its black if its 4 its brown i had to replace mine today Link to post Share on other sites
Cuske 0 Posted March 4, 2009 Author Report Share Posted March 4, 2009 Have you got any idea where the other end should be, does it run straight to the fan? Link to post Share on other sites
russvr6 0 Posted March 4, 2009 Report Share Posted March 4, 2009 i'm not sure i'll look tomorrow Link to post Share on other sites
gavinvr6 0 Posted March 5, 2009 Report Share Posted March 5, 2009 if ur not running aircon then there is no need to worry. i got a brown one but since i dont have aircon there is no need for it. if it bothers you go to vag or ebay and get a blanking plug Link to post Share on other sites
Recommended Posts