pimpcat 0 Posted February 10, 2008 Report Share Posted February 10, 2008 any one kno what i could use to stick a rear heated screen element onto the rear screen as it broke off my brothers rover? any ideas wud be helpful Link to post Share on other sites
ventovr6essex1 0 Posted February 10, 2008 Report Share Posted February 10, 2008 what do u mean you broke it ? if u have scrached off part of the heater bar then you need some of this http://www.speeding.co.uk/acatalog/Electro_Connector_Heated_Screen_Repair_Kit_.html Link to post Share on other sites
lee060 3 Posted February 10, 2008 Report Share Posted February 10, 2008 what do u mean you broke it ? if u have scrached off part of the heater bar then you need some of this http://www.speeding.co.uk/acatalog/Electro_Connector_Heated_Screen_Repair_Kit_.htmlor if its the terminals that have come off then i guess it over for that heated screen .ive spent hours and tried many things but i cant find a way of making those terminals attach , you got any tips? ventovr6?? tried solder and many others , had to give up in the end would be nice to know a way of repairing them as we've had a few now that jave done it.... Link to post Share on other sites
pimpcat 0 Posted February 11, 2008 Author Report Share Posted February 11, 2008 no the terminal has come off there has got to be a way of doing it as rac do i jst dont know what 2 use Link to post Share on other sites
mike 6 Posted February 11, 2008 Report Share Posted February 11, 2008 iv had a new rear glass in mine, looks like they have used som kind of putty, (black) silicone? for the terminals Link to post Share on other sites
lee060 3 Posted February 11, 2008 Report Share Posted February 11, 2008 quiet a few ive seen are soldered on , must be something we can get our hands on to repair them!? ive tried many diff teqniques with solder to get them to stay on and no luck so far... Link to post Share on other sites
Phat VR6 3 Posted February 11, 2008 Report Share Posted February 11, 2008 Super clue. Worth a try if you can still keep a conection lol Link to post Share on other sites
pimpcat 0 Posted February 11, 2008 Author Report Share Posted February 11, 2008 lol super glue dont work tried that lookin at double sided copper tape nd the double sided graphite pads Link to post Share on other sites
rodney 17 Posted February 11, 2008 Report Share Posted February 11, 2008 If you place something which wot conducts on the end of the connector and then super glue. A bit heath Robinson but it'll work.The glue is not a conductor so need to place something to act as one. Try and make it look right as it helps electrically. Link to post Share on other sites
rodney 17 Posted February 11, 2008 Report Share Posted February 11, 2008 If you place something which wot conducts on the end of the connector and then super glue. A bit heath Robinson but it'll work.The glue is not a conductor so need to place something to act as one. Try and make it look right as it helps electrically. Link to post Share on other sites
Recommended Posts