nivag27 5 Posted January 7, 2008 Report Share Posted January 7, 2008 So guys and girls is there any tips for us standard engine VR's that will give us better HP on the rolling road, and I only mean simple things that don,t cost any money :$ Link to post Share on other sites
SankysVR6 1 Posted January 7, 2008 Report Share Posted January 7, 2008 Are you runing an induction kit as it might be a good idea to give it clean, or change the air filter and give it an oil change. Link to post Share on other sites
nivag27 5 Posted January 7, 2008 Author Report Share Posted January 7, 2008 It has just had a full service and it has a bmc panel filter Link to post Share on other sites
Phat VR6 3 Posted January 7, 2008 Report Share Posted January 7, 2008 You can get that stuff you pore in the petrol tank to increase the octain level to 105 instead of 98? Its cheeting abit lolHave you taken the cone out of your airbox? Link to post Share on other sites
purple highline monster 0 Posted January 7, 2008 Report Share Posted January 7, 2008 have you taken the "trumpet" part out of your air box Gav? its easy to remove just get a sharp chisel like i did!!! lets air flow in better over the whole filter Link to post Share on other sites
Karr-Man 0 Posted January 8, 2008 Report Share Posted January 8, 2008 So guys and girls is there any tips for us standard engine VR's that will give us better HP on the rolling road' date=' and I only mean simple things that don,t cost any money :$ [/quote']hehe when i said that this would be a challenge and we could battle it out i didnt think u would take it so seriously;)dont worry i have an OBD1 im sure u will beat me easily;) Link to post Share on other sites
nivag27 5 Posted January 8, 2008 Author Report Share Posted January 8, 2008 Hello Nick good to hear you, I have done all that to my air box, and I am not taking it that seriously matey just thought I would get any ideas, every little helps Link to post Share on other sites
jims13 6 Posted January 8, 2008 Report Share Posted January 8, 2008 well, you can cheat by increasing tyre pressure's, and a few other things, but mainly its down to the rr operator, and how much loss he puts through the trasmission..rr figures will always differ from one to another.. Link to post Share on other sites
ingham 5 Posted January 8, 2008 Report Share Posted January 8, 2008 make sure tracking is spot on Link to post Share on other sites
jims13 6 Posted January 8, 2008 Report Share Posted January 8, 2008 yeah, my tracking was that far out before i had my 4 wheel alignment done, that it tried to climb out of the rollers , and coud'nt be run, Link to post Share on other sites
Recommended Posts