tompo1979 0 Posted November 14, 2007 Report Share Posted November 14, 2007 Hi guys as above, want to do a coolant change on the vr..bit fiddley to get bottom hose of rad cuz of aircon pipes or sumet.Is there just a drain plug on the rad/engine block to make it easier? Thanks in advance Link to post Share on other sites
Ciaran 4 Posted November 15, 2007 Report Share Posted November 15, 2007 nope mate u will have to just take the hose off and i know those stupid clips are a mare just make sure u replace it with a jubilee clip to make it easier if u need to do it again Link to post Share on other sites
SankysVR6 1 Posted November 15, 2007 Report Share Posted November 15, 2007 There is a drain plug, but it's on the carck pipe and of pain to get too. You would be better stugling and taking the bottom hose off. Link to post Share on other sites
richievr 1 Posted November 15, 2007 Report Share Posted November 15, 2007 absolutely, the drain plug is on the crack pipe but it is a night mare to get to. the bottom rad hose will be easier - you can get to it from underneath fairly easily.. Link to post Share on other sites
tompo1979 0 Posted November 16, 2007 Author Report Share Posted November 16, 2007 ok guys many thanks Link to post Share on other sites
Recommended Posts