VR6 Man 0 Posted January 4, 2004 Report Share Posted January 4, 2004 could sum 1 post a pic of control valve please, as it reqs a good clean. ta Link to post Share on other sites
1990 1 Posted January 5, 2004 Report Share Posted January 5, 2004 Hows that? Link to post Share on other sites
vrPat 0 Posted January 5, 2004 Report Share Posted January 5, 2004 Which 'bit' of the pic is it? Also how would you go about cleaning it, do you soak it in thinners or something??Cheers Link to post Share on other sites
binliner 0 Posted January 5, 2004 Report Share Posted January 5, 2004 Isnt it the black and silver thing top half of the pic slightly to the right (just above the throttle cable)... if it is I dont think I have one! Link to post Share on other sites
vrPat 0 Posted January 10, 2004 Report Share Posted January 10, 2004 I have looked today, and I don't appear to have that either?? Link to post Share on other sites
zerocool 0 Posted January 11, 2004 Report Share Posted January 11, 2004 later vr6's had an electronic throttle body which controlled the idle,only earlier vr's had the idle valve on them as pictured above Link to post Share on other sites
acf8181 0 Posted January 11, 2004 Report Share Posted January 11, 2004 while we're locating things, where's the MAF sensor?[ Edited Sun Jan 11 2004, 06:34PM ] Link to post Share on other sites
vrPat 0 Posted January 12, 2004 Report Share Posted January 12, 2004 The MAF is the bit after the airbox / filter, which has an electrical plug attached to it. It then is attached to the big black hose thats in the bottom left quarter of the above pic. Hope that helps Link to post Share on other sites
Recommended Posts