mike 6 Posted January 15, 2007 Report Share Posted January 15, 2007 Just had a sevice and they havnt cleaning it by looks of things :-( Gonna do it myself, what do i need? some sort of degreaser spray iv heard? where do i get it formcheers Link to post Share on other sites
kalv 0 Posted January 15, 2007 Report Share Posted January 15, 2007 A bit of petrol does the trick.. wash it from inside out.. then re-oil it if need be Link to post Share on other sites
Earwig 89 Posted January 15, 2007 Report Share Posted January 15, 2007 PiperX do a special cleaning fluid for theres. I used it on mine once and it worked a treat ! Mark. Link to post Share on other sites
lee060 3 Posted January 17, 2007 Report Share Posted January 17, 2007 dirt retention fluid from piper x(as said above^) , and dont use too much of it, not great for MAF sensors . as for cleaning petrol works fine (as again said above^ ) enjoy Liam Link to post Share on other sites
mike 6 Posted January 22, 2007 Author Report Share Posted January 22, 2007 im not putting petrol on teh foam part! lolas for damaging the maf, id take it offfirst lolnow to find this piperX cleaner Link to post Share on other sites
lee060 3 Posted January 23, 2007 Report Share Posted January 23, 2007 im not putting petrol on teh foam part! lolas for damaging the maf' date=' id take it offfirst lolnow to find this piperX cleaner [/quote']i mean when its running , if you over oil it , the oil gets drawn in and doesnt do the MAF meter any good as it passes it as for the oil i have some you can have its how to get it to you tho . if you were " just round the corner " it would be much easier . Liam Link to post Share on other sites
mike 6 Posted January 24, 2007 Author Report Share Posted January 24, 2007 well, noticed theinduction kit was neary falling out yesterday :@ the service place hadnt fastened it back on properly. so propves they did take it off but the foam still feels tacky. Link to post Share on other sites
mike 6 Posted January 24, 2007 Author Report Share Posted January 24, 2007 im not putting petrol on teh foam part! lolas for damaging the maf' date=' id take it offfirst lolnow to find this piperX cleaner [/quote']i mean when its running , if you over oil it , the oil gets drawn in and doesnt do the MAF meter any good as it passes it as for the oil i have some you can have its how to get it to you tho . if you were " just round the corner " it would be much easier . Liam cheers for teh offer! maye see you at ultimate dubs? altho hopin to get it done asap Link to post Share on other sites
Seademon 0 Posted January 24, 2007 Report Share Posted January 24, 2007 I washed my filter out in the sink with a bit of fairy liquid - I've used that dirt retention spray before on an old car, wouldnt use it again! Link to post Share on other sites
mike 6 Posted January 24, 2007 Author Report Share Posted January 24, 2007 I washed my filter out in the sink with a bit of fairy liquid - I've used that dirt retention spray before on an old car' date=' wouldnt use it again! [/quote']was it a ram air tho? iv heard ram airs are very different to normal filters, made diff material ect Link to post Share on other sites
Recommended Posts