Dubsingh 0 Posted September 5, 2006 Report Share Posted September 5, 2006 hi guys i have water driping out from the joint where the crack pipe meets the thermostat housing....i feel its the seal that has persihed am i right??it only started today Link to post Share on other sites
flexin 0 Posted September 5, 2006 Report Share Posted September 5, 2006 i had the same thing mine turned out to be the seal between the housing and the block.pesonally i think if you're taking it off to change the crack pipe seal do them all, saves doing it twicejohn Link to post Share on other sites
dellert 0 Posted September 5, 2006 Report Share Posted September 5, 2006 I will second that! Link to post Share on other sites
Dubsingh 0 Posted September 5, 2006 Author Report Share Posted September 5, 2006 there only two seals on the crack pipe right...dam i only ordered one should av got the stat seals aswell any one got part numbers plz Link to post Share on other sites
gav_113 0 Posted September 6, 2006 Report Share Posted September 6, 2006 ask vr6_russ! Link to post Share on other sites
mannie 0 Posted September 6, 2006 Report Share Posted September 6, 2006 Hope this helps,thermo housing to block : A021 121 119 Asender switches O ring : AN 903 168 02thermostate seal : N 901 368 02thermo-fr housing seal : AN 101 392 01(crack pipe O ring) : AN 101 392 01You will also need a bottle of G12 coolent Link to post Share on other sites
dellert 0 Posted September 6, 2006 Report Share Posted September 6, 2006 NEed three of the sender switch o rings! Link to post Share on other sites
Recommended Posts