Jump to content

Repurr

Members
  • Content Count

    35
  • Joined

  • Last visited

Everything posted by Repurr

  1. Hi, Looking to sell "as is" my VR6 which I've owned since 98. Reason for sale is that Halfords burnt out some of the dashboard wiring when they tried to fit a new radio and as part of their settlement offer, I keep the car. The car is in SW London and currently not drivable as the dashboard was removed by a VW main dealer to diagnose the damage. It passed it's MOT (to Aug 2018) the shortly before the dash was removed and I was driving it up-to the dashboard removal Attached is a summary of the life of my VR6 and a couple of photos. Welcome offe
  2. Hello, Is a dashboard wiring loom for a MK3 Golf 8 a compatible fit into a MK3 Golf VR6? R
  3. Toddy - Halfords have sent an independent assessor to prepare a report on the car and I've yet to hear the outcome of this. R
  4. Thanks for all your comments. Starting the claim with Halfords, so will keep you posted. R
  5. Thanks for comments so far. I've DM's James E Looms, so will www what they have to say. Anyone now any breakers yards who deal with VW's/VR6?
  6. Mk3 Golf VR6 Hello, Halfords recently fitted a new radio, managed to burn out the live feed to the radio and melt/burn a large of wires behind the dashboard. I've had a Main VW dealer inspect it, who advise it is uneconomical to repair due to the extensive damage and that as VW no longer make spares for the VR6, the repair would be a very long process to check the damage to the bits and bobs attached to the ,melted wires. Now waiting for Halfords to come back to me with their proposals. A couple of questions: Anyone had a similar experience and
  7. Hi, R Plate VR6 Highline I replaced my radio/cd player with another Sony model and for a while have v poor radio reception on the stations I can get, which is very few. The only I have done with the aerial is stick the broken rubber bee sting washer (between aerial and roof) with some black mastic. Appreciate tips and comments to get the radio properly tuned. Thanks R
  8. Hello, I need to replace my subframe on my R Plate VR6 Highline and have bought a Mk 3 golf subframe, which I'm told will fit as they are all the same. Is this correct? Thanks R
  9. Thanks for your reply. MOT last year Sept advised that Sub Frame and Wishbones were corroded. VW garage could not advise on lifespan, so keen to get them looked at/and replaced if necessary. Not a expert on matters under the car, so here come the stupid questions: Can you replace front wishbones with R32 rear ones, or have I missed the point, and what is polybusing them (told you they were stupid!) R
  10. Hi, I'm looking for a good SW London Garage (near Wimbledon/Colliers Wood) to have some work done on my R plate VR6. Work needed to replace: Rear Discs Wishbones Sub Frame I would normally use a VAG garage, but they no longer supply these parts. Also looking for best place to source these parts? Appreciate your help on this. Thanks R
  11. Hi, Looking to get the bolsters on my Driving seat repaired using surrey trimmers. There quote is £140 for each bolster (2) plus VAT for a leather replacements. Anyone used them and have any thoughts? Thanks R
  12. Hi, The RHS side cushion on my drivers seat is really worn (Leather purple violet, colour coded) and trying to find a way to replace the leather covering? Has anyone had this problem and can recommend where I can get it replaced on some colour coded leather to stick over it. Many thanks R
  13. Thanks for that. How do you get into the door to check that and also where is the best place to buy the clips (in the UK)
  14. Hi, I disconnected the wiring socket between the rear driver’s door and reconnected it and now the central locking doesn’t work. There is air being blown through the pipe in the gaiter but appears to be escaping and not activating the lock. Welcome all ideas and thoughts
  15. 97/98 MK3 Vr6 Highline Hi, When washing my car, I noticed the rear driver’s side window was just open. I tired to close it, the motor worked when I pressed the button but nothing happened. When I pressed it to go down it went down and will now not go up, the motor is working both going down and up. Any ideas as to the cause of this? and How do you remove the inner door panel to investigate the inner workings of the door as from an initial look, I can’t figure how to do it? Thank you
  16. Thanks for all the comments and posts to this thread. I went with the Halfords 6mm sticky pads and my number plate is well stuck. Thank you all
  17. I am looking to do that, wanted to find an easyish way to remove the bolts?
  18. Hi, One of the rear number plate bolts (which secure the number plate holder to the car) has corroded so much that the number plate holder is loose. Have read another posting about the challenges of removing the bolts, grinding, touching up etc. Does anyone have any other ideas to try first before using the grinding method? Thanks
  19. Hi, R Plate Highline VR6 My aerial base unit washer has perished and parted company from the aerial last week. Any ideas where I can get a new washer? Thanks
  20. Hi, I replaced the stereo in my VR6 with a Sony model, the ATT (Attenuate) intermittently comes on and off when driving through certain areas. As it appears this can only be turned off, via remote control, it's a bit of a pain. Can anyone offer any ideas on how to solve this. Thanks
  21. Hi, Many thanks for all posts, links and comments. Judging from the replies, it appears the crank sensor is likely to be the culprit, so getting this changed next week. Really appreciate all posts.
×
×
  • Create New...