Earwig 89 Posted July 18, 2006 Report Share Posted July 18, 2006 I have a Clifford Concept300Never had a problem with it until now.Yesterday it started playing up and would not unlock. It was very intermittant and eventually it worked and out I went and locked and unlocked several times going from place to place.Today I have the same problem except it won't open full stop :-(I have been out and changed the battery in the fob but still no luck.I don't have a second fob as the contacts inside were worn out and it is unusable.I have opened this fob up and it still looks brand new inside !I am thinking it might have something to do with the heat as the car is sat in full sunlight and is red hot. This is the only thing I can think of. I will try again when the sun goes down and the car cools down.Any ideas?Mark. Link to post Share on other sites
mattyt 0 Posted July 19, 2006 Report Share Posted July 19, 2006 I had a concept 300 in my mk2. Do you have the two overide switches inside the car. What if you put it into valet mode? I programmed my own keyfob i mite still have this info on my pc will have a look. Link to post Share on other sites
Earwig 89 Posted July 24, 2006 Author Report Share Posted July 24, 2006 I do have the buttons inside.All seems to work now though. Maybe it was just the heat. :-(Still need a second fob though....Any idea how much these are? And do ou not have to programme them yourself?MArk. Link to post Share on other sites
mattyt 0 Posted July 24, 2006 Report Share Posted July 24, 2006 hi mark i got mine off ebay for 8 quid. Mine was a arrow not a clifford. Still easy tho. Turn ignition onYou need to put the car in valet mode on the remote. Then press and hold the star button on the plain view switch (one inside the car) hold for about 3 seconds until u hear a chirp. then release.Then press and release the button in the car with no star u should hear 1 chirp. then press and release the button with the star. u should hear another chirp.Now press the unlock button on the new remote. should hear 1 chirp. press again and should be done.is that like ya keyfob as there are several types??http://cgi.ebay.co.uk/CLIFFORD-3-BUTTON-REMOTE-ALARM-KEY-FOB-BLIP_W0QQitemZ320010445939QQihZ011QQcategoryZ75329QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Link to post Share on other sites
Earwig 89 Posted July 25, 2006 Author Report Share Posted July 25, 2006 Not mine.Slightly different to that. Can't see mine on there at presant. Will keep an eye out though now I know !Never knew they sold so cheap ! I was expecting to pay £40 ! or more :-)Sounds fairly easy to programme the new fob. I have the instruction book still with instructions so hopefully I will be ok.Thanks very much for the help !Mark. Link to post Share on other sites
mattyt 0 Posted July 26, 2006 Report Share Posted July 26, 2006 No worries mate, it took me a few attempts but it was easy to do. Yes just keep an eye out for the keyfob as there are several different ones, pop up on fleebay all the time and sell cheap!! Link to post Share on other sites
Recommended Posts