Justicevr6 0 Posted April 22, 2006 Report Share Posted April 22, 2006 I am going to replace the front struts and wishbones,My question is do I need special tools to do undo the strut nuts ( I have coil spring tool)Cheers. Ian Link to post Share on other sites
dubloke 4 Posted April 22, 2006 Report Share Posted April 22, 2006 u will need a swan neck spanner to get on the nut, or a socket with two suitable flats ground on the top to get a spanner on and your allen key goes thru the middle. job done! Link to post Share on other sites
mk3anni 0 Posted April 22, 2006 Report Share Posted April 22, 2006 Or use an impact gun, much quicker and much much easier. Link to post Share on other sites
Justicevr6 0 Posted April 23, 2006 Author Report Share Posted April 23, 2006 Thanks guys.I was going to do them tomorow be just remembered Grand prix is on ,oh well Monday it is then . Link to post Share on other sites
Bman 0 Posted April 23, 2006 Report Share Posted April 23, 2006 impact gon on shocks is dodgy.... ok for undoin but don't use for tightening u could snap the shafts. i've seen it done before.. Link to post Share on other sites
robvr6 0 Posted April 23, 2006 Report Share Posted April 23, 2006 a spark plug spanner works well too Link to post Share on other sites
Recommended Posts