Leemo 0 Posted March 16, 2006 Report Share Posted March 16, 2006 I am goin to be fitting a new set of leads and spark plugs, was wantin to no which plug and lead is which?? 1-6 left to right and so on. also does a normal spark plug socket fit in the holes cause they look a little tight. Link to post Share on other sites
mk3anni 0 Posted March 16, 2006 Report Share Posted March 16, 2006 Why don't you just change them 1 at a time. Link to post Share on other sites
Leemo 0 Posted March 16, 2006 Author Report Share Posted March 16, 2006 Cause my car is away in the garage in bits just now getting a de cat pipe made and my new leads turned up and they are numbered 1 to 6 and i wont see my car till mid next week. Link to post Share on other sites
Petesvw 0 Posted March 16, 2006 Report Share Posted March 16, 2006 Look on the right hand side of the plastic cover, the channels for the leads are numbered, match the number on the plastic to the leads! Link to post Share on other sites
Leemo 0 Posted March 16, 2006 Author Report Share Posted March 16, 2006 thanks mate havent looked and now that i need to i cant get to my car. what about spark plugs and socket? Link to post Share on other sites
dubloke 4 Posted March 16, 2006 Report Share Posted March 16, 2006 normal plug socket is fine, awkward, but fine! Link to post Share on other sites
Leemo 0 Posted March 16, 2006 Author Report Share Posted March 16, 2006 thanks Link to post Share on other sites
antera309 3 Posted March 16, 2006 Report Share Posted March 16, 2006 The numbers are marked on the coil pack too. As you look at the front of the car, the cylinders go:. 1 3 5. 2 4 6 Link to post Share on other sites
Ciaran 4 Posted March 17, 2006 Report Share Posted March 17, 2006 u will find some leads will not reach also and some are to long they are custom made!! Link to post Share on other sites
jb9999 0 Posted March 19, 2006 Report Share Posted March 19, 2006 Sounds like you have some of the leads on the wrong plugs Ciaran? if some are too short and some too long. ;)Schoolboy error. Doh!!!! %-6 Link to post Share on other sites
Recommended Posts