SankysVR6 1 Posted March 13, 2006 Report Share Posted March 13, 2006 Thinking out aloud :! :! If was to buy a super for my VR6 and later down the line i decided to sell car and take the charger out. Would it be possible to have the same charger fitted to something like a Mk4 V6 4Motion or even a R32. Or would it be to much of headache ( to fit. Link to post Share on other sites
FishWick 21 Posted March 13, 2006 Report Share Posted March 13, 2006 It is, providing you source the relevant pipe work and brackets etc to fit it to 24V. They're not cheap. The charger itself costs about £1000 new on it's own, so the other parts and development costs represent the remainder of the kit prices.Some 24Vs (Audi and MK5 R32) for example can only have the charger mounted on the nearside, in which case you'd need a charger that blows in the opposite direction.Might be better to get the 4 motion or whatever first and then charge it? Link to post Share on other sites
wayne_1@tiscali.co.uk 27 Posted March 13, 2006 Report Share Posted March 13, 2006 v9fsq fits all 12v vr6 and v6 24v and r32 the actual charger bolts into position as normal but it can be rotated round to run in the opposite way and then it will be just the pipework to fit car Link to post Share on other sites
Recommended Posts