corollakilla 1 Posted January 10, 2017 Report Share Posted January 10, 2017 I see everywhere info about how to turbo a vr6 but what i dont see are any videos anywhere. I wonder ifnanyone has found an in depth diy on the steps to boost a vr6. It seems to me like a pretty popular mod and it really surprised me that i couldnt find anything on it. If i knew more about it i would take it upon myself but im still learning myself. Link to post Share on other sites
sedge 7 Posted January 11, 2017 Report Share Posted January 11, 2017 My how to video would last 2 years and still not be running that's the problem. corollakilla 1 Link to post Share on other sites
VR6Pete 1,455 Posted January 11, 2017 Report Share Posted January 11, 2017 There are probably several reasons why there is no single video that exists as there is never any 2 turbo installations that are the same. - different hardware - turbo's intercoolers, waste gates and manifolds / short runners. - different management - factory / stand-alone management. It all depends on what output you want to achieve and what your budget is, you may need low comp spacers, pistons, rods etc.. as well depending on the answer to that question. one thing that is common across every conversion is that; - you will need bigger brakes - good tyres! - decent suspension! - a healthy engine and coolant system - fit a wide band. and do not go cheap on the mapping ! With plenty of research on the internet and this forum you will learn everything you need to know getting started Link to post Share on other sites
corollakilla 1 Posted January 11, 2017 Author Report Share Posted January 11, 2017 The main thing i struggle with is associating what i read to physically doing it. Sometimes it just takes seeing it be done to make it click. Link to post Share on other sites
Recommended Posts