Jump to content

Throttle position sensor, part number swappable?


Recommended Posts

Hi all, next in the corrado saga! The boost solenoid is back clicking and it looks like an electronics issue as the ecu shows a TPS error and its shows 16% open all the time don't know if it's connected?

Any way the TPS that's on their is special (surprise,surprise!) part number 037907385M, it has 2 connectors both 3 pin one a bit bigger, my current connection uses the smaller one, this thing is best part of £100 to replace! So I looked at the next one 037907385N and it looks like the same but single smaller connection, same sort of years etc

If it fits the throttle body would it work? Maybe swap connector if needed?

and they are £20

TFL

Steve

Link to post
Share on other sites

Hi, modded but still using a "VW" tps. I ordered a cheaply from ebay and will see if it works.

I have been looking at a Colbert generic TPS has anyone had any dealings with these?

TFL

Steve

Ill have a look in my shed I think I have an obd1 throttle body in there.  Scrap that just read your thread you have modded tb

Link to post
Share on other sites
×
×
  • Create New...