VR6king 18 Posted December 24, 2014 Report Share Posted December 24, 2014 I have no idea what is wrong with the VR6 now. I was changing the Injectors, and installing the C2 chip. Injectors did not work, so i replaced with stock ones to continue to run it to work lightly. Now the car refuses to stay on and wants to shut off completely unless you give it gas. Any help??? Everything is connected! And almost everything is new like TPS, MAF, and Idle control valve etc....i have alot of expirience with VR6 but this one right here has me with a blank thought. Any help please Link to post Share on other sites
VR6king 18 Posted December 24, 2014 Author Report Share Posted December 24, 2014 Also checked fuses and relays, all seem to be working just fine Link to post Share on other sites
VR6CABBS 1,311 Posted December 24, 2014 Report Share Posted December 24, 2014 Have you tried running it with MAF disconnected to see if it will idle?Sent from my iPad using Tapatalk Link to post Share on other sites
VR6king 18 Posted December 25, 2014 Author Report Share Posted December 25, 2014 Yea i did, and it still idles very rough. When you plug it back up it completely shuts off which i know its working its brand spanking new. Cost me $300 Link to post Share on other sites
VR6CABBS 1,311 Posted December 25, 2014 Report Share Posted December 25, 2014 Have you had it plugged in pal. Good chance it will show the faults. Sent from my iPad using Tapatalk Link to post Share on other sites
Bealieboy 1,625 Posted December 25, 2014 Report Share Posted December 25, 2014 What symptoms show when the blue water temp sensor goes tits up? That causes these kind of issues I believe? Sent from my iPhone using Tapatalk Link to post Share on other sites
VR6king 18 Posted December 26, 2014 Author Report Share Posted December 26, 2014 I checked everything, and still havent found someone to scan my VR6 since its an OBD1. I do not own one for it. However, i did notice that when you disconnect the TPS nothing happens it remains the same. When you connect it back up, nothing happens and it continues as if it did not exist! If you unplug ISV it will stall. If you unplug MAF it stalls. Sooo, i know they are working they are bran new! But what would you guys say about the TPS? Link to post Share on other sites
Bealieboy 1,625 Posted December 26, 2014 Report Share Posted December 26, 2014 Does the tps want recalibration or replacement? Sent from my iPhone using Tapatalk Link to post Share on other sites
VR6king 18 Posted December 26, 2014 Author Report Share Posted December 26, 2014 Does the tps want recalibration or replacement? Sent from my iPhone using TapatalkWelp! Just replaced it with my buddies and still problem occurs! I think the problem is in the ECM. Link to post Share on other sites
VR6king 18 Posted December 26, 2014 Author Report Share Posted December 26, 2014 Let me remind you guys, everything was working perfect on the VR until i installed the chip. One i put everything back to stock chip this problem began to occur Link to post Share on other sites
Recommended Posts