petemcr 2 Posted January 21, 2014 Report Share Posted January 21, 2014 Now, I know this is supposed to be fairly straight forward from what I've read but I am wondering if my tensioner bolt is past it, I have the old style one, so I know you have to use a thin piece of wire to release the bearing in bottom, but my question is how hard should you have to press down, I'm using a B string of a guide to do it and it isn't releasing at all, from what I understand I should be able to press it down easily once this has been released but it will not move at all Any help would be aweomse Link to post Share on other sites
VR6Pete 1,455 Posted January 24, 2014 Report Share Posted January 24, 2014 Yoooo. How did you get on with this? Should be straight forward to be honest matey ! Club Chairman Link to post Share on other sites
Lukey. 381 Posted January 25, 2014 Report Share Posted January 25, 2014 If you're having lots of trouble with it take the opportunity to get a later spring loaded bolt. VR6Pete 1 Link to post Share on other sites
Recommended Posts