Pieman 0 Posted January 10, 2013 Report Share Posted January 10, 2013 Is it possible to fit R32 coils pack to a VR6???Has anybody ever done it??? Link to post Share on other sites
Lukey. 381 Posted January 10, 2013 Report Share Posted January 10, 2013 No.They are all individual and go in the head, the 12v is a 6in1 box that has leads coming off it to the spark plugs. Link to post Share on other sites
Pieman 0 Posted January 10, 2013 Author Report Share Posted January 10, 2013 I know that but can the loom be modified?? Link to post Share on other sites
FishWick 21 Posted January 11, 2013 Report Share Posted January 11, 2013 I did it with my standalone (12V turbo) and it's a piece of cake, but it's worth is questionable as the spark strength from R32 coils isn't any stronger than the stock VR6 coilpack's.Each coil needs a switched live, a ground to the head, a ground to the chassis and a signal from the ECU.Only snag is you need 6 coil driver signals from the ECU. Motronic only has 3. Although they are still fired in pairs on the R32 (as per 12V), you could just pair up the 3 Motronic driver outputs for wasted spark, i.e. 1/6, 4/2 & 3/5. I've never tried that though, so can't guarantee it will work.And lastly, the engine looks a mess with 6 COPs poking out the sides, lol.In short, it's a nice little experiment but probably a waste of time for the gains you'll get, if any! Link to post Share on other sites
craggsy 91 Posted January 11, 2013 Report Share Posted January 11, 2013 Jake has individual coils on his vrt van Link to post Share on other sites
Daverse 175 Posted January 11, 2013 Report Share Posted January 11, 2013 Or MSD coil pack it for something different. Link to post Share on other sites
Recommended Posts