Pieman 0 Posted November 13, 2012 Report Share Posted November 13, 2012 I have bought and fitted some new magnecor 10mm HT leads. I started it up and it started missing straight away. I looked down at each lead in the head and could see that each lead is arcing out.What would cause this??? Link to post Share on other sites
spadam 7 Posted November 13, 2012 Report Share Posted November 13, 2012 Are the leads brand new if so did you make sure there properly connected to the spark plugs Link to post Share on other sites
Pieman 0 Posted November 13, 2012 Author Report Share Posted November 13, 2012 They are new leads and they have "Clicked" into place as if they are connected properly. Link to post Share on other sites
VIW28 29 Posted November 13, 2012 Report Share Posted November 13, 2012 They will click and then click again, make sure they are well on. If you haven't got the proper metal tool carefully use a flat screwdriver to push them right on. Sometimes you think they are pushed on when they arent. Link to post Share on other sites
spadam 7 Posted November 13, 2012 Report Share Posted November 13, 2012 Yea there not the easiest to things to get properly located Link to post Share on other sites
Recommended Posts