Jump to content

[moved] hello help 4 newbie!!


Recommended Posts

Hello all im new here and am in need of some advice, i have recently purchased a golf vr6 j reg and the gearbox needs rebuilding. i knew this when i bought it, and i was wanderin if anyone knows the cheapest place to get it rebuilt?

thanx in advance jody

Link to post
Share on other sites

yep....i got it done by a guy who goes under the username of 'hotgolf' on cgti forum....he did a mates 020 as well.

you'd have to ask him how much it;ll be, and if he can as i know he's very booked up.

whats actually gone on yours?

theres are a few options...

as a base you can just have yours recon'd

next step up is to replace the diff pins for bolts (th e pins failing is the common failure on 02a's)

next step up is to do the above plus putting in a lower final drive gear...this will in prove accelaration but means you'll run out of revs at about 140mph (as opposed to 160mph as standard - which the engine will not push you to, its not powerful enough!)

next step above that is to add a quaife or peloquin ATB diff. this will give you a huge increase in tracion and make the car conrer much qucker (but will drop you into a wall if you lift mid corner)

top of the range would be a 6 speed conversion...this will cost mega bucks and parts are hard to come by i believe.

Link to post
Share on other sites

ok well my cousin used to own the car, and the box went on him so he bought a second hand one that needed a rekon and got it fitted b4 recon!! then it lost 2nd gear. and as far as i know now it has none but havent tried it! but just want the cheapest option really!

Link to post
Share on other sites

is a risk buying second hand box...i bought one, plugged it in and it was struggling to find gears. as it turns out the damage was very minor. but as a PITA as it had to come out again.

i do have a spare box in my garage, however it needs a rebuild (whining diff, and worn 2nd gear syncro).

you can use boxes off 5 speed mkIV v5's apparantely as well...they're a better box from what i hear (o2j)

Link to post
Share on other sites

i don't thing thats right, it appears to suggest its from a 1.8t...you need the one off the V5 as bell housing will be different. i do wonder if you coudl bolt your existing 02a bell housing to a 1.8t 02j though.

not sure on the ratios on the 1.8t box as well....from my understanding the v5 box is equivelant to the o.e. vr6 box with a lower final drive.

as i said, this is only what i've 'heard', so best to do some serious research before paying out any cash.

Link to post
Share on other sites
×
×
  • Create New...