VRmonster 1 Posted March 23, 2005 Report Share Posted March 23, 2005 anyone got any spare cam sprockets from a coilpack vr6, needs to be in good order. had some coming from dubstar, but hes found out theyre damaged so im after some to convert my obd1 to coilpack. any takers?also, would the cam position sensor wheel on the rear sprocket attatch to my obd1 sprockets at all, as there are 2 types listed on etka? but they change over at '97 so whats the deal. the only difference in etka between coilpack and dizzy is the coilpack versions show the cam position sensor, and the dizzy versions show a clutch...? any help acf, lol oops, posted this in the wrong place, sorry mods...[ Edited ] Link to post Share on other sites
VRmonster 1 Posted March 24, 2005 Author Report Share Posted March 24, 2005 26 views no replies, bah humbug, lol Link to post Share on other sites
acf8181 0 Posted March 24, 2005 Report Share Posted March 24, 2005 sorry....been in hospital so obviously couldnt reply!are the sprokets the same part no (on yours and on a coilpack car)? if so, all you'll need is the sensor bits and pieces. if they're different no's then you'll need the sprokets as well. Link to post Share on other sites
Recommended Posts