Jump to content

Recommended Posts

hey guys i need some help

on my way down the a3 last night my car developed a miss fire. then sorted itself out then miss fired again. i ended up having to limp it home for about 70 miles. with it keep doing it.

i put it on a generic fault code reader and got the following 3 faults

voltage terminal 30

positioning m. for centre outlets v102

mixture adaption

can anyone tell me what these mean please i really need my car working

Link to post
Share on other sites

Sounds like a typical coil pack issue. I had the same problem, intermittent misfire, let the engine cool down, all fine, then as the engine warmed up the worse the misfire got. Replaced the coil pack, no more misfire. See if anyone is local to you who wouldn't mind you having a lend of their coil pack to eliminate this as the cause.

Best of luck, electrical faults are always a pain...

Link to post
Share on other sites

thats what i thought,

the old gal is due a service anyway so i'm going to swap coil pack plugs and leads when i do the oil change. but knowing my luck it will still crap out hence listing the faults found. hoping it might pin point something before i go spending a fortune i dont need to.

Link to post
Share on other sites

right i replaced coil pack, leads and plugs. took it on a 2 mile round trip of surface streets and a bit of a dual carriageway blast and not a hint of miss fire :)

paul i pm'd you the vag 6 digit codes to look at when u get a chance.....

cheers

Link to post
Share on other sites
×
×
  • Create New...