VeedubVR 0 Posted March 2, 2012 Report Share Posted March 2, 2012 So ive got no brake rear lights. they were fine until we started stripping the car down (engine out type stuff). Every other light works....Not the bulbs or fuses. Replaced the switch on the pedal for a difference one and still no lookThe connectors are in the holders on the lights themselvesAny ideas? need it sorted ASAP Thanks Link to post Share on other sites
CALICO 130 Posted March 2, 2012 Report Share Posted March 2, 2012 Earth not connected somewhere?? Link to post Share on other sites
russj249 2 Posted March 2, 2012 Report Share Posted March 2, 2012 Was it a good known working switch you tried. I would remove the switch and use a bridge jumper wire in the plug, basically completely.rule out the switch then.. just put a piece of wire in both terminal where the switch would go to short them out, then see what happens, then with that bridged, you can check down the line further.Definitely no broken wires off the brake light switch? and have you tested the power into the fuseboard at the fuse? Link to post Share on other sites
Recommended Posts