Vw_owner 1 Posted February 12, 2012 Report Share Posted February 12, 2012 has anyone gone 24v? seriously considering going 24v on my corrado, but has anyone here already done this themselfs? where did you get the loom modified/spliced? and how much did it cost? thanks.. Link to post Share on other sites
Lukey. 381 Posted February 12, 2012 Report Share Posted February 12, 2012 theres tons of info about on R32 conversions knocking about on the internet, havent really seen one for just going to the 2.8 24v though Link to post Share on other sites
Vw_owner 1 Posted February 12, 2012 Author Report Share Posted February 12, 2012 yea m8 there is tons of info but nothing that realy helps my questions.just hopen that someone here thats actualy done this conversion themselfs replys Link to post Share on other sites
Lukey. 381 Posted February 12, 2012 Report Share Posted February 12, 2012 if you look in the projects section theres a few, i think the most recent one i saw with the best content was absy (?) try contacting through PM or something Link to post Share on other sites
Vw_owner 1 Posted February 12, 2012 Author Report Share Posted February 12, 2012 nice one , i'll have a butchers Link to post Share on other sites
spadam 7 Posted February 12, 2012 Report Share Posted February 12, 2012 Im sure both united motorsports and storm can sort the loom out for you. Absy did a great thread and the car is looks great. Link to post Share on other sites
VIW28 29 Posted February 13, 2012 Report Share Posted February 13, 2012 I am currently building a 2.8 24v BDE turbo for mine, should be alive in three weeks all being well...United Motorsport are doing my looms for me. Link to post Share on other sites
Vw_owner 1 Posted February 13, 2012 Author Report Share Posted February 13, 2012 I am currently building a 2.8 24v BDE turbo for mine' date=' should be alive in three weeks all being well...United Motorsport are doing my looms for me.[/quote']ah so united motorsports know whats up! im fairly new to all this electrics stuff, i know that the mk4 stuff is completley different to the mk3 platform though, which part of the mk4 loom would they need? all of it? think i read some where that the mk4 loom is one big peice , this true?cheers.. Link to post Share on other sites
VIW28 29 Posted February 13, 2012 Report Share Posted February 13, 2012 From the mk4 they will need the loom between ecu and 14 pin plug on chassis leg plus as long tails from other side of that plug as far as you can cut them back, plus loom that goes to clutch, brake and throttle pedal switches. That's as far as the mk4 goes, you will then need an OBD1 VR management loom to mate into. That's as far as I can remember, need to freshen my memory though. Link to post Share on other sites
Vw_owner 1 Posted February 13, 2012 Author Report Share Posted February 13, 2012 cheers for that, Link to post Share on other sites
Recommended Posts