hilla 0 Posted November 18, 2011 Report Share Posted November 18, 2011 Hi-guysI-had-my-VR-scanned-this-week-and-no-major-faults-came-uP.what-else-should-i-be-looking-at.My-car-feels-sluggish-at-low-revs-and-is-using-a-bit-too-much-fuel-and-when-i-drive-on-a-summer-day-the-car-has-a-rough-idle.This-is-a-Printout-of-the-Vag-ScanTuesday,15,November,2011,13:48:01:13314VCDS Version: Release 908.0Data version: 20090911----------------------------------------------------------------------------------------------------------------------------------------------------------------Chassis Type: 1H - VW Golf/Vento IIIScan: 01 02 03 08 12 15 25 41 56-------------------------------------------------------------------------------Address 03: ABS Brakes Labels: 3A0-907-379.lbl Part No: 3A0 907 379 Component: ABS ITTAE 20 GI V00 Coding: 03604 Shop #: WSC 00000 6 Faults Found:00283 - ABS Wheel Speed Sensor; Front Left (G47) 35-00 - - 00285 - ABS Wheel Speed Sensor; Front Right (G45) 35-00 - - 00283 - ABS Wheel Speed Sensor; Front Left (G47) 16-10 - Signal Outside Specifications - Intermittent00283 - ABS Wheel Speed Sensor; Front Left (G47) 04-10 - Mechanical Malfunction - Intermittent00285 - ABS Wheel Speed Sensor; Front Right (G45) 16-10 - Signal Outside Specifications - Intermittent00285 - ABS Wheel Speed Sensor; Front Right (G45) 04-10 - Mechanical Malfunction - Intermittent-------------------------------------------------------------------------------Address 25: Immobilizer Labels: 1H0-953-257.lbl Part No: 1H0 953 257 B Component: IMMO VWZ3Z0R8193418 V00 Coding: 09600 Shop #: WSC 00996 1 Fault Found:00546 - Data wiring faulty 27-00 - Implausible SignalEnd --------------------------------------------------------------------- Link to post Share on other sites
bungy 2 Posted November 18, 2011 Report Share Posted November 18, 2011 00546 http://wiki.ross-tech.com/wiki/index.php/00546 Link to post Share on other sites
hilla 0 Posted November 18, 2011 Author Report Share Posted November 18, 2011 the fault code for that immobiliser has been erased and did not return on 2nd scan. That immobiliser does not even exist anymore, im using autowatch level 4 in the vehicle now. Link to post Share on other sites
cbmotorsport 0 Posted November 18, 2011 Report Share Posted November 18, 2011 i had this problem, no faults but felt very hesitant at low rpm ,and sometimes when pulling from 50/60mph in 4th gear, it seemed to pull back. turned out to be the lambda sensor, also had this with my 8 valve too. can you get into live readings with vag com? Link to post Share on other sites
b road blaster 0 Posted November 18, 2011 Report Share Posted November 18, 2011 you can if its the proper version Link to post Share on other sites
bungy 2 Posted November 18, 2011 Report Share Posted November 18, 2011 If you have VCDS you can watch the lambda performance in real time whick could help. Link to post Share on other sites
hilla 0 Posted November 19, 2011 Author Report Share Posted November 19, 2011 hi guys, somebody did the scan for me, i even told the guy to check Lambda & MAF for faults. know i will have to pay R450.00 again for a scan. Therefore i love doing everything myself, because it will be done right the first time. Link to post Share on other sites
Recommended Posts