jsh712p 0 Posted March 7, 2005 Report Share Posted March 7, 2005 Hi,Got a funny prob with the Vr.....drivers side electric window - the 'auto winding' (after holding the button) works for up and down on the passenger window, and works for down on the drivers window, but doesnt work on the drivers window on the way up?What could be causing that? It doesnt appear to struggle or be sticking? Ive read in the manual how to 'programme' the auto feature, and it doesnt make any difference.Any one know how the mechanism works, and any things I should check?The main power to the door recently required re-connecting as it split - could this be part of the problem?Cheers Link to post Share on other sites
Zonda_ 0 Posted March 8, 2005 Report Share Posted March 8, 2005 Where in the manual does it tell you how to program the auto feature? I've had problems with my windows since I got my Vento ( Link to post Share on other sites
stu h 0 Posted March 8, 2005 Report Share Posted March 8, 2005 this has been bought on here not too long ago -do a search and see what it brings up fellas Link to post Share on other sites
MarkGolf 6 Posted March 8, 2005 Report Share Posted March 8, 2005 i got that too... Link to post Share on other sites
Devilfish 0 Posted March 8, 2005 Report Share Posted March 8, 2005 me too Link to post Share on other sites
jsh712p 0 Posted March 8, 2005 Author Report Share Posted March 8, 2005 zonda - i got the info from a vw tech manual - it says about 'programming' the auto feature after the battery has been disconnected (dont know how relevant this is to all models). Basically you have the window(s) open, and then shut them using the key in the drivers door - when the window shuts keep the key in the lock position for about 2 secs. Then relock and hold for another 2 secs. Repeat again twice I think, and thats it?I may have got the wrong end of the stick - but thats what I thought it meant. I assume that the controller for the winder (the bit attached to the motor mechanism?) detects the long press and 'auto' winds the window for you. So I dont see how it will only work one way. A guy at work sasy that his Honda (very new) is the same - he seems to think its supposed to be like that - but I dont as my 1993 GTi works on the way up - but wouldnt work on the way up on the passenger side!!!! Link to post Share on other sites
Bahnstormer 0 Posted March 23, 2005 Report Share Posted March 23, 2005 Could be a bodged Clifford alarm install.Just ripped mine out and binned it - wiring and relays were patched in all over the place.Windows now go down AND up !!!! 8) Link to post Share on other sites
Recommended Posts