Ben Allen 0 Posted March 7, 2005 Report Share Posted March 7, 2005 Hello,I'm doing some more research for my Vento VR6 article and I have a couple of points I need to clear up to finish off the piece.Do VR6 Ventos have discs all round, or drums at the rear? Also are the discs vented or solid as standard?Plus, what type of suspension setup does it have?I'd assume it had single wishbones at the front with macpherson struts, and a beam axel at the rear with ARBs? Is that correct?Cheers,Ben Link to post Share on other sites
acf8181 0 Posted March 7, 2005 Report Share Posted March 7, 2005 discs all round...fronts are 280mm vented (pre '96 cars), or 288mm vented ('96 on cars)rears are not vented, and not sure what size off the top of my head.susp, yeah...same set up as golf. Link to post Share on other sites
Atlas 12v 0 Posted March 9, 2005 Report Share Posted March 9, 2005 239mm rear I think Link to post Share on other sites
fabio_vr6 0 Posted March 26, 2005 Report Share Posted March 26, 2005 229 rear i think Link to post Share on other sites
robvr6 0 Posted March 26, 2005 Report Share Posted March 26, 2005 according to etka it's 226mm...357 615 601bhope this helps Link to post Share on other sites
fabio_vr6 0 Posted April 2, 2005 Report Share Posted April 2, 2005 i was close then Link to post Share on other sites
Recommended Posts