Jump to content

Recommended Posts

i haven't looked into this area on the vr6, but presuming its the same set up as a gti its most likely to be the automatic switch thats in the rad...or even could be that its not plugged in.

do not let the car get hot enough for the light to come on or you're risking damaging your head gasket, or even the head itself...whcih will cost mega bucks.

Link to post
Share on other sites

Yeah, second what acf said , don't let the car get that hot. If you know the fans aren't working, don't use it. The VR6 engine needs a great deal of cooling, its a big lump in a small space. I blew a head gasket myself from inadequate cooling, ie no fans. There are various tests you can do to find out if it's the fans or the sensors. Have a search on here mate, it involves putting in a wire jumper to con the fans into thinking they should be on. If the fans come on then you have a sensor issue, if the fans don't come on then you know they are suspect. Don't risk it or you will wreck it....guaranteed :-(

Link to post
Share on other sites
×
×
  • Create New...