eViL 0 Posted March 3, 2004 Report Share Posted March 3, 2004 Ok then. I'm buying all the stuff for my engine at the moment.. but if I bought an OBD1 VSR manifold on the group buy, but at a later date bought a Highline (OBD2) (as is planned) would my VSR manifold become completely obsolete for the highline or could I just change a few simple things and away we go? Link to post Share on other sites
VR6Pete 1,455 Posted March 3, 2004 Report Share Posted March 3, 2004 I think it's down to the size of the throttle body that would detrimine that. Link to post Share on other sites
eViL 0 Posted March 3, 2004 Author Report Share Posted March 3, 2004 so that's a no then Link to post Share on other sites
1990 1 Posted March 4, 2004 Report Share Posted March 4, 2004 I think the schrick is the same for obd 1 & 2, there is just a part of it that can be changed to accept either obd 1 or 2 throttle body. You should be able the buy just that part if you swapped in the futureThe bit is shown at the back of this pic Link to post Share on other sites
VR6Pete 1,455 Posted March 4, 2004 Report Share Posted March 4, 2004 ask in the shrick group buy thread so Vince can answer ur questions Link to post Share on other sites
simey 0 Posted March 4, 2004 Report Share Posted March 4, 2004 The part that connects to the throttle body is slightly different as the OBD1 has an extra pipe connection which can be capped off for OBD2 £183.95 01684 578844[ Edited Thu Mar 04 2004, 11:43AM ] Link to post Share on other sites
faigolfgti 0 Posted March 4, 2004 Report Share Posted March 4, 2004 The part that connects to the throttle body is slightly different as the OBD1 has an extra pipe connection which can be capped off for OBD2 £183.95 01684 578844[ Edited Thu Mar 04 2004' date= 11:43AM ]Hi!I would like to know is it posible to get the vsr control unit(the grey box),because mine only working at 3000rpm if i adjust it to factory setting 4000rpm it won't work. Link to post Share on other sites
Recommended Posts