*P3nfold* 0 Posted November 8, 2010 Report Share Posted November 8, 2010 I have bought some FK 15mm PCD Adapters and would like to know where to get shorter wheel bolts from? Link to post Share on other sites
cabrioman 6 Posted November 8, 2010 Report Share Posted November 8, 2010 e bay ...... Link to post Share on other sites
oldmandon 1 Posted November 8, 2010 Report Share Posted November 8, 2010 OOOOOOOOOOooooooh a new thread..........Don't know the answer to your question, sorry. Link to post Share on other sites
Ben Seabrook 4 Posted November 8, 2010 Report Share Posted November 8, 2010 get your grinder out mate 5 mins job done thats what I did Link to post Share on other sites
*P3nfold* 0 Posted November 8, 2010 Author Report Share Posted November 8, 2010 Thanks Tony,I know they are M12's 1.5mm 21mm looking at the FK site but theirs two bloody types.http://www.fk-automotive.org.uk/websale7/Wheel-Bolts.htm?Ctx={ver%2f7%2fver}{st%2f3ea%2fst}{cmd%2f0%2fcmd}{m%2fwebsale%2fm}{s%2ffk-automotive%2fs}{l%2fEnglish%2fl}{mi%2f27-2834%2fmi}{fc%2fx%2ffc}{p1%2f2d2fb377cb1f64de317159d80199aee7%2fp1}{md5%2f129ad61fc98f30a55e6869ba15ccb4fc%2fmd5}Does anyone know Link to post Share on other sites
*P3nfold* 0 Posted November 8, 2010 Author Report Share Posted November 8, 2010 Crumbs I am slow on the draw tonight. Thanks Ben I wish I had a bloody grinder!!I got to say all it feels like the VR is against me with the issues with the Schrick and all. Link to post Share on other sites
*P3nfold* 0 Posted November 8, 2010 Author Report Share Posted November 8, 2010 OOOOOOOOOOooooooh a new thread..........Don't know the answer to your question' date=' sorry. [/quote']I know I am getting quite common on the forum posting lots of questions and problems.Hopefully I will get them solved and be able to give something back to the forum soon. Link to post Share on other sites
Ben Seabrook 4 Posted November 8, 2010 Report Share Posted November 8, 2010 ah shame well then if you have a wheels & tyres place nearby just whip one of your bolts out take it down and they should be able to sell you some to fit Link to post Share on other sites
*P3nfold* 0 Posted November 8, 2010 Author Report Share Posted November 8, 2010 Good point I will get on that tomorrow.I know its hard to say but does anyone have D90's with 15mm spacers with 21mm wheel bolts?If not I better get a ruler out, its true its not always about size???? lol Link to post Share on other sites
craggsy 91 Posted November 8, 2010 Report Share Posted November 8, 2010 well i would say that 21mm would work.Dont FK use cap head bolts in there adapters...you know allen key type? Link to post Share on other sites
*P3nfold* 0 Posted November 8, 2010 Author Report Share Posted November 8, 2010 well i would say that 21mm would work.Dont FK use cap head bolts in there adapters...you know allen key type?They do! This is what my kit looks like Link to post Share on other sites
*P3nfold* 0 Posted November 9, 2010 Author Report Share Posted November 9, 2010 The response from FK.Hi Martin,FK12211 = M12 x 1.5 21KE (KE = Tapered Head Bolt)FK12212 = M12 x 1.5 21KU (KU = Round Head Bolt)I would have no idea what bolt you would require.You would need to measure and figure that out.Questions I would ask if I was trying to figure out what bolt I need would be.· Thread / Shaft Bolt Length:· Type of Bolt Head: Example: Round Head / Tapered Head / Short Head)· What Size Bolt do you require e.g. M12 / M14Then once you have these questions answered then either you / me could figure out what bolts you require.Kind regards,Mit freundlichen GrüßenShane LancasterExport DepartmentDoes anyone have any idea which bolts I need? I am guessing they are M12 or M14 but I have no idea. I did google but found nothing of any use. I will try http://www.cthtuning.co.uk/ Link to post Share on other sites
craggsy 91 Posted November 9, 2010 Report Share Posted November 9, 2010 M12 to bolt to hub I beleive Link to post Share on other sites
*P3nfold* 0 Posted November 9, 2010 Author Report Share Posted November 9, 2010 FK dont create shorter bolts, oh well I found someone at the office who has a grinder? Link to post Share on other sites
Recommended Posts