yakuza racer 16 Posted October 4, 2010 Report Share Posted October 4, 2010 my inner cv joint keeps popping out, i even replaced it, but second time it pooped out i checked EVERYTHING, only thing i could see is that the cv shaft is bent a bit.... is this the cause??? should i replace the cv shaft as well???please help me, my car needs to be dricing as it's going to be featured in a local mag Link to post Share on other sites
dman78 1 Posted October 4, 2010 Report Share Posted October 4, 2010 could be mate and i would think it being bent would cause some vibration aswell Link to post Share on other sites
yakuza racer 16 Posted October 4, 2010 Author Report Share Posted October 4, 2010 yes i got nasty vibration before it poped off again... Link to post Share on other sites
dman78 1 Posted October 4, 2010 Report Share Posted October 4, 2010 in that case i would change the whole cv joint,inner and outer Link to post Share on other sites
yakuza racer 16 Posted October 5, 2010 Author Report Share Posted October 5, 2010 changed the whole thing and it's still happening, i changed everything, is something bent?? i didn't hit a pothole or climb a pavement...... Link to post Share on other sites
legvw 0 Posted October 5, 2010 Report Share Posted October 5, 2010 If you can, take the whole shaft off to see if its bent.It could be your engine moving around too much causing the driveshaft to pop out. Have you checked your gearbox/engine mounts? Link to post Share on other sites
Recommended Posts