superted23 0 Posted September 1, 2010 Report Share Posted September 1, 2010 i have just done a front caliper change and a full system bleed, when the engine is off i get very positive feedback from brake pedal and can only move it a few centremetres but once i start the engine i can put the pedal to the floor and get very little brake power. can any one help please Link to post Share on other sites
b road blaster 0 Posted September 1, 2010 Report Share Posted September 1, 2010 sounds like you got air in the abs pump mate you will need to do a bleed with vag com if that has happend Link to post Share on other sites
vr6stormt 0 Posted September 1, 2010 Report Share Posted September 1, 2010 try bleeding with the engine running i had to when i had this prob and it sorted it enough till (b road blaster) bled the abs pump for me Link to post Share on other sites
superted23 0 Posted September 2, 2010 Author Report Share Posted September 2, 2010 where is the abs pump on an ODBI engine set up and is there anyway of manually bleeding or purging without vag.com? Link to post Share on other sites
b road blaster 0 Posted September 2, 2010 Report Share Posted September 2, 2010 don't think you can do it without vag com mate not 100% sure but 99% i'v got a vag com but not the odb1 adapters and not to far from you if you can find any give me a shout and i can come and do it for you Link to post Share on other sites
superted23 0 Posted September 3, 2010 Author Report Share Posted September 3, 2010 cheers dude, i will pop up to local garage this weekend and get them to do it, if not i will be in touch, many thanks Link to post Share on other sites
Recommended Posts