gavinvr6 0 Posted August 20, 2010 Report Share Posted August 20, 2010 folks i need a vr hub nut socket and a front tup mount socket. im gunna be attacking the mk3's strip down next week as i aint touched it since paul and bungy took the engine out in under an hour lol.. that was about a month ago and i need the mk3 gone by end of next week but need these parts removed first Link to post Share on other sites
spadam 7 Posted August 20, 2010 Report Share Posted August 20, 2010 What size are they do you no? Link to post Share on other sites
spadam 7 Posted August 20, 2010 Report Share Posted August 20, 2010 Also have you got an obd1 fan control module you wana sell me. Link to post Share on other sites
russj249 2 Posted August 20, 2010 Report Share Posted August 20, 2010 hub nuts i believe are a 30mm 12 point nut.. cant remember what the top mounts are but think they're around an 18mm?? Link to post Share on other sites
gavinvr6 0 Posted August 21, 2010 Author Report Share Posted August 21, 2010 top mounts are 22mm.adam i may be using the control module. if i dont then yes i'lll have one Link to post Share on other sites
legvw 0 Posted August 21, 2010 Report Share Posted August 21, 2010 I would come over mate an lend a hand but i'm so busy atm. I've just got too much on! Sorry. Link to post Share on other sites
bungy 2 Posted August 21, 2010 Report Share Posted August 21, 2010 Bad timing for me aswell, i'm away for a bit. Bite the bullet and buy yourself a set. You'll need them later anyway. Link to post Share on other sites
spadam 7 Posted August 21, 2010 Report Share Posted August 21, 2010 Let us no when your free ive got a 30mm and 22mm il bring my set over 1 night or sumink. Yea let us no about the control module. Really need 1 i brought an obd2 module but it has wrong conectors. Link to post Share on other sites
gavinvr6 0 Posted August 21, 2010 Author Report Share Posted August 21, 2010 is that the big box that bolts to the underside of the header tank bracket?? i've read i can just wire the rad sensor thingy to control the fans anyway so if that works out i wont use it. dont quite get the twin fan thingy as the second fan on mine is run from the first fan via a thin belt. so dont know how it contros it unless it's a twin speed controller Link to post Share on other sites
gavinvr6 0 Posted August 21, 2010 Author Report Share Posted August 21, 2010 i'll be on it most nights next week, mon-thur. poss miss wed to take the rug rats to cinema or sometng. so any of those, let me know when your gunna pop round n i'll free up that night Link to post Share on other sites
spadam 7 Posted August 22, 2010 Report Share Posted August 22, 2010 yea no worries mate yea black box under neath header tank. can pop over either tuesday or thursday. Link to post Share on other sites
gavinvr6 0 Posted August 24, 2010 Author Report Share Posted August 24, 2010 im gunna be having a go at the car tonight if anyone can loan me a couple of sockets for a couple of hours, can collect and return if nobody can bring them. at most i'll bring em back tomorrow Link to post Share on other sites
spadam 7 Posted August 24, 2010 Report Share Posted August 24, 2010 Im around thursday evening if you want a hand mate. Busy tonight tho. Link to post Share on other sites
gavinvr6 0 Posted August 25, 2010 Author Report Share Posted August 25, 2010 yeah have other things i can do until i have the 2 sockets i need. gotta get the entire interior out plus fuel tank/pump and all the little bits until its ready to go then i can lose the glass and doors and that.whichs begs another question---- does anyone have a bonded glass wire? to cut out the screen. Link to post Share on other sites
Recommended Posts