BADOIR 2 Posted April 17, 2010 Report Share Posted April 17, 2010 Well...after swapping the wishbone and balljoint, things are still not good,the nearside wheel still wants to kiss the offside ?? next step is new hub fingers crossed that sorts it otherwise we could be looking at subframe/chassis issues which dont sound nice to me,Worst case senario.....New project, on a budget, will update next week , Thanks Bigjobbo, for the wishbone, And thanks Dlea for the help and the soon to be delivered hub, also thanks toTony for your advice and input, where would we be without you???.. ^o) Link to post Share on other sites
grafteratwork 2 Posted April 17, 2010 Report Share Posted April 17, 2010 have you tryd tracking the car? Link to post Share on other sites
BADOIR 2 Posted April 17, 2010 Author Report Share Posted April 17, 2010 Thats what caused the damage lol, tracked it at the ring... But seriously, i, ll do that when i get the hub on, the wishbone had a 45 degree bend in it, dont think it helped having the inpact whilst travelling backwards either.. Link to post Share on other sites
vr6stormt 0 Posted April 17, 2010 Report Share Posted April 17, 2010 have you tryd tracking the car?on this note i had similar probs which tracking did`nt sort it turns out you need to make sure both struts to hubs( 2x 18mm bolts) are both equal got the traking done again and it was sorted? Link to post Share on other sites
J5KE F 0 Posted April 17, 2010 Report Share Posted April 17, 2010 Fingers crossed for u martin! Link to post Share on other sites
nivag27 5 Posted April 18, 2010 Report Share Posted April 18, 2010 Hope its not too bad mate, didn't know about your off art the ring, and backwards too what a nightmare, good luck dude Link to post Share on other sites
Recommended Posts