BigAnt 0 Posted April 13, 2010 Report Share Posted April 13, 2010 Morning All!I've woken this morning to a problem with the VR. It doesn't want to start. I switch the ignition on and all the warning lights appear as they should. I go to turn it over and nothing happens. The engine doesn't turn over and there are no sounds whatsoever. The clock doesn't reset, so the battery should be fine...Does anybody have any ideas? I have an auto electrician coming out to have a look tomorrow afternoon, but it would be nice to get this resolved before then!Thanks in advance. Link to post Share on other sites
b-a 0 Posted April 13, 2010 Report Share Posted April 13, 2010 i had a problem like this it was a relay gone i got round it for a bit by takin the battery out and leave it for 10 -15 mins put it back together and it worked it just needed to reset itself worth a try . Link to post Share on other sites
BigAnt 0 Posted April 13, 2010 Author Report Share Posted April 13, 2010 Thanks for taking the time to reply.Can you remember what number relay you had to replace? Link to post Share on other sites
b-a 0 Posted April 13, 2010 Report Share Posted April 13, 2010 no sorry i had a garage do it they told me to do that just to get by for a few days till it went in.. Good luck with it Link to post Share on other sites
VR6Nat 9 Posted April 13, 2010 Report Share Posted April 13, 2010 also Check the wires on the starter motor... Link to post Share on other sites
BigAnt 0 Posted April 13, 2010 Author Report Share Posted April 13, 2010 Thanks a lot for your replies. I'll have another look at the car when I get home tonight and let you know the outcome tomorrow. Link to post Share on other sites
BigAnt 0 Posted April 15, 2010 Author Report Share Posted April 15, 2010 Thanks Nat. It was a loose connection on the starter motor. The old girl is up and running again now! Link to post Share on other sites
Recommended Posts