t5kyo 0 Posted March 8, 2010 Report Share Posted March 8, 2010 Hi guys i just need to know if replacing the front engine mount is something i could do myself on the drive or is it a mechanics job?? What sort of time span we looking at, and is there any specialist tools involved??? Link to post Share on other sites
Ben Seabrook 4 Posted March 8, 2010 Report Share Posted March 8, 2010 fairly easy mate as long as the top nut undoes !! if so you can do it on the drive prob take 30 mins or so and no specialist tools needed Link to post Share on other sites
CALICO 130 Posted March 8, 2010 Report Share Posted March 8, 2010 a couple of socket extentions for the top bolt easy enough to get to the bottom one make sure engine is cold when you do it as it gets warm around there undo bolts jack up engine i think i lowered the nearside of the front crossmember to make it easier but less than an hour Link to post Share on other sites
thegoth 5 Posted March 8, 2010 Report Share Posted March 8, 2010 fairly easy mate as long as the top nut undoes !! Ha Ha! Link to post Share on other sites
Ben Seabrook 4 Posted March 8, 2010 Report Share Posted March 8, 2010 sorry couldn't resist Link to post Share on other sites
t5kyo 0 Posted March 8, 2010 Author Report Share Posted March 8, 2010 thanks guys, im gonna have a go myself as soon as i get a mount! cheers for the help!! Link to post Share on other sites
t5kyo 0 Posted March 27, 2010 Author Report Share Posted March 27, 2010 sorted the engine mount too! its a solid one, and really works well, reducing the movement on the engine and lifting on /off throttle doesn't make me cringe now!! thanks for the advice guys Link to post Share on other sites
Recommended Posts