Pearsy47 1 Posted March 4, 2010 Report Share Posted March 4, 2010 my reverse light seems to be stuck on for some reason anyone with ideas ??? i ve un plugged it then plugged it back in but nothin????? Link to post Share on other sites
Scott 0 Posted March 4, 2010 Report Share Posted March 4, 2010 the switch on the gearbox u mean? did they go off when the GB switch was disconnected? It will be stuck in the "make" position if so, if not, theres an unintentional earth on the ground side of the reversing lamp holders, but thats less likely than the gearbox switch, its on the outside, near the shift mechanism at the GB end on most cars, not looked for the vr one as such but they are all the same.,.some are on the shift inside but thats rare.. Link to post Share on other sites
CALICO 130 Posted March 4, 2010 Report Share Posted March 4, 2010 remove fuse Link to post Share on other sites
Pearsy47 1 Posted March 5, 2010 Author Report Share Posted March 5, 2010 basicly when i un-plugged the resverse light they still stayed on i dunno what to do ? Link to post Share on other sites
Scott 0 Posted March 5, 2010 Report Share Posted March 5, 2010 dont unplug the lamp!The faultt will be at the gearbox end. Theres a switch that goes on when you shift into reverse. Its on the gearbox near the end of the shift cable levers Link to post Share on other sites
Pearsy47 1 Posted March 8, 2010 Author Report Share Posted March 8, 2010 na i wasn t going to un plug the lamp basic i got mixed up with what is the reverse plug on the gearbox lol and a couple of wire where mixed up then put that right they work now!!! Link to post Share on other sites
Scott 0 Posted March 8, 2010 Report Share Posted March 8, 2010 lol good one Link to post Share on other sites
Recommended Posts