PhilippVR6 0 Posted February 21, 2010 Report Share Posted February 21, 2010 Ever since I mounted a Rotrex Supercharger on my VR6 I have had this weird "problem".Everytime the engine gets high RPM the clutch gets soft. The next time I use it its almost half way in the floor. The clucth goes back to normal after using it a couple of times afterwards.I'm thinking that it has something to do with the brake vacuum as the clucth is connetet to the same hydraulic system?? Link to post Share on other sites
fredfelcher 0 Posted March 2, 2010 Report Share Posted March 2, 2010 Hi, having similar problem here - clutch only returns halfway after fast bit of driving but works OK when using lower revs. No problem with engaging clutch at all - no slip, no crunch etc.Assume it must be vacuum; I have a Schrick but no charger. Also noticed it's taking a bit longer to start in the mornings recently.Any help appreciated Link to post Share on other sites
FreddyFel 0 Posted April 19, 2010 Report Share Posted April 19, 2010 Had this same problem myself. Turned out to be the clutch slave had a leak in the diaphragm around the pushrod.Swapped it for a spare I had lying around and it's sorted. Link to post Share on other sites
LiamD 0 Posted April 23, 2010 Report Share Posted April 23, 2010 I had the same problem on my old 16v Rado and as above - it was the clutch slave cylinder leaking fluid. New one for about 50 quid and an hours labour solved the problem.HTH Link to post Share on other sites
Recommended Posts