muttley 0 Posted February 5, 2010 Report Share Posted February 5, 2010 Just brought myself a down n out vento sticker for the vento but i'm not putting it on yet coz its a LIE lolHow do i get the down n out look. i have jemex coilovers ready to go on so lowering wont be problem The only thing is i have the original VR6 alloys still on the car, i cant afford anymore alloys at the moment so i'm gonna overhaul what i already have, so this meens spacers i take it ?My car is on shocks n springs at the moment so its low'ish but already the rear's are in the arches so how can i physically go wider without snagging the arches.I'm in a pickle but i want to get it sorted before show season really starts properly. Here's a picI googled some vento images and there doesn't seem to be many Booty owners that can pull it off Link to post Share on other sites
rodney 17 Posted February 5, 2010 Report Share Posted February 5, 2010 well, if you are being seriosu about it you will need to roll and pull the arches. Then those wheels will pop up there with the right bits fitted. Link to post Share on other sites
muttley 0 Posted February 5, 2010 Author Report Share Posted February 5, 2010 well' date=' if you are being seriosu about it you will need to roll and pull the arches. Then those wheels will pop up there with the right bits fitted.[/quote']will that meen losing the arch kit.I've already ordered shims and now looking through Venom's range of spacers but i'm not sure what width to get i was think 25mm. then i'm gonna change the tyres to 175/50 Link to post Share on other sites
Ben Seabrook 4 Posted February 5, 2010 Report Share Posted February 5, 2010 lower profile tyres too ! Link to post Share on other sites
rodney 17 Posted February 5, 2010 Report Share Posted February 5, 2010 well' date=' if you are being seriosu about it you will need to roll and pull the arches. Then those wheels will pop up there with the right bits fitted.[/quote']will that meen losing the arch kit.or at least modifying it.. Link to post Share on other sites
DanH 1 Posted February 6, 2010 Report Share Posted February 6, 2010 same, cant afford wheels or tyres :-( ive 'rolled' my front arches and it seems to of done the trick till i take it lower. needs spacers up the back thoim so in love with this below, 195 50's, 20mm rears 15 mm front spacers (not a fact, been told lol) sits perfect (h) Link to post Share on other sites
muttley 0 Posted February 6, 2010 Author Report Share Posted February 6, 2010 same' date=' cant afford wheels or tyres :-( ive 'rolled' my front arches and it seems to of done the trick till i take it lower. needs spacers up the back thoim so in love with this below, 195 50's, 20mm rears 15 mm front spacers (not a fact, been told lol) sits perfect (h)[img']http://i5.photobucket.com/albums/y156/fiesta_dan/gold-1.jpgI'm so in love with that car, that is awesome. I wonder if thats a rattle can paint job on that I wasn't aware spacers could be used on the front Link to post Share on other sites
Recommended Posts