big scott 0 Posted January 27, 2010 Report Share Posted January 27, 2010 heading says it all, i am changing from a obd1 to a obd2 wiring loom and stuff for turbo reasons and my engine is a distributer cap and needs to be changed to a coilpack for it to run, can any of you petrol heads tell me how and what is needed for this thanking you for your help Link to post Share on other sites
GavinG 0 Posted May 2, 2010 Report Share Posted May 2, 2010 Hi big scotthow did you get on with this, i am trying to do the same thing...... Link to post Share on other sites
big scott 0 Posted May 17, 2010 Author Report Share Posted May 17, 2010 hi well i have built the engine currently its still out the car as its getting stripped for paint so am none the wiser if it all works yet lad Link to post Share on other sites
vr6mattwirral 0 Posted May 17, 2010 Report Share Posted May 17, 2010 hi i have recently dne this at the weekend to my car as i had to get another engine an it was a dizzy and had to swap it to coil.it works fine,some parts need changing not too hard tho Link to post Share on other sites
VR6Pete 1,455 Posted May 18, 2010 Report Share Posted May 18, 2010 I'm in the process of turning my OBD1 Corrado VR6 to OBD2.Parts needed;Coilpack (well, didnt need this as ive already got one!OBD2 Throttle bodyOBD2 Engine loomLambda sensorMAFImmobiliser stuffOBD2 inlet manifold Link to post Share on other sites
lowvr 0 Posted May 18, 2010 Report Share Posted May 18, 2010 I'm in the process of turning my OBD1 Corrado VR6 to OBD2.Parts needed;Coilpack (well' date=' didnt need this as ive already got one!OBD2 Throttle bodyOBD2 Engine loomLambda sensorMAFImmobiliser stuffOBD2 inlet manifold when you do this please please can you do a write up, I will also be doing mine but its going to get a bit tricky with the turbo install at the same time and some smoothing/spraying and hiding of looms[/quote'] Link to post Share on other sites
Recommended Posts